Description
Labels are an easy way to add a unique design to help establish your brand and clearly state what a product is. They are great for customizing any otherwise generic item. Labels are also a helpful organizational and advertising tool. Use our labels to tell your customers what a product is, how to use it, or why they want it.
- Labels are wound into 3” cores. This is an industry standard and should work for most applications. Typically, the core size only matters when a label is being applied by an automated labeling dispenser. We suggest you verify a 3” core will work with your application prior to ordering.
- Roll labels have not been approved for direct contact with food. Do not apply roll labels to already frozen materials.
- The roll label will need to be un-rolled a few layers before the printed product is revealed.
- All of our labels have permanent adhesives and can be applied at temperatures as low as 25+F, with a service temperature range of -60+F to +200+F.
- Our labels and finishes provide protection from moisture, abrasion, scratches and harsh conditions.
Artwork Setup
In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.
If you are uploading PDF files created in Photoshop, please be sure all layers are flattened.
We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.
Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.
- Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
- Use a minimum resolution of 300 dpi for image files.
- Specify trim area with crop marks. (Don’t place crop marks inside the work area.)
- Artwork should have 1/8″ (0.125″) bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- Safe Area is the 1/8″ (0.125″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
- If you want printed borders, they must be placed a minimum of 1/8″ (0.125″) inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
